Water splashes in the kitchen sink can be quite unpleasant. Here our guide for how to prevent water splashing in kitchen sink.
Have you ever wanted to do your dishes at the kitchen sink and the water splashed on you? Absolutely No!
When the kitchen faucet is switched on, the water comes in contact with the sink with a particular force. Water from the kitchen sink can splash on you, on the sink counter, the back of the sink, and even on the floor.
Therefore, water splashing in the kitchen sink must be prevented as it can lead to a wet and messy kitchen.
There are a few ways to prevent water from splashing in the kitchen sink. One way is to install a splash guard at the sink. Splash guards are small pieces of plastic that fit over the drain, and they help to prevent water from splashing. Another way to prevent water splashing in the kitchen sink is to install a low-flow sink.
Water Splash Guard for Kitchen Sink: TYOARO Silicone Sink Splash Guard.
8 Ways to Prevent Water Splashing in the Kitchen Sink
1. The Right Choice of Faucet and Sink
Water splashing in the kitchen sink can be prevented by the right choice of faucet and sink. Ideally, a high faucet goes with a deep sink and a low faucet goes with a shallow sink.
A high faucet paired with a shallow sink causes water splashing in the kitchen. The force of the water from the shallow faucet coming into contact with a shallow sink will be greater than that of a deep sink. This causes the water on impact with the sink to splash around.
The depth of the sink reduces the force of water coming from a high faucet, thereby reducing water splashing. When purchasing a kitchen sink and faucet, keep this in mind.
2. The Use of Aerators
The rate at which water flows from the faucet is also known as the water velocity. This determines the amount of force with which the water comes from the faucet.
A high flow rate means the water will come with a force. This increases the chance of water splashing.
The water flow rate can be increased and decreased. The water flow rate can be increased with the use of sprayers in your faucet.
This is useful in some areas, like gardening or in car washes where water is sprayed. The water flow rate can be decreased by fixing an aerator in your kitchen faucet.
Aerators mix air with the water in the faucet, thereby reducing the water velocity. This reduces the chances of water splashing in the sink. The aerator is fixed to the faucet end and should be washed on a regular basis.
3. The Use of a Faucet with a Moderate Flow Rate
The size of your faucet may be the culprit behind water splashing in your kitchen sink. A tiny faucet end means water will come out of it with more force. This produces turbulent flow, thereby causing the water to splash.
Meanwhile, in a faucet with a wider end, water comes out with less force in a laminar flow. This prevents water from the kitchen faucet from splashing.
Tiny faucet ends and turbulent flow is utilized in some cases, like in gardening or in car washing. The bathroom shower also makes use of a wide-end faucet, producing a laminar flow.
If you notice your faucet end is tiny, you may want to change it to one that is a bit wider.
4. The Use of a Kitchen Sink Anti-splash Guard
Another way to stop water splashing in your kitchen sink is the use of the kitchen sink anti-splash guard. The kitchen sink anti-splash guard is a device you will probably consider keeping in your kitchen.
It is fixed to the kitchen sink to guard against splashes in the sink. It can be attached to all sides of the sink, blocking water from splashing on you, the countertop, and the floor.
The kitchen sink anti-splash guard also fixes the issue of messy sink splatter.
The kitchen sink anti-splash guard is affordable and easy to fix. Attach it to the sink before you work there, and remove it and wash it when you are done.
5. The Use of Flexible Faucets
If you ever find yourself in a situation where you do not know whether to choose a high or a low faucet, opt for a flexible faucet.
There are different flexible faucets with different degrees of rotation. There are faucets with a 360-degree rotation. This can be adjusted to different directions.
This way, the water splashes can be prevented by controlling the direction of the water coming from the faucet. The flexible faucet can be rotated and kept at an angle where water will not splash.
6. Turning the Faucet on at Low Pressure
You must have turned on your faucet too fast and ended up with a wet shirt. Such scenarios can be prevented simply by turning on the faucet slowly at low pressure.
Turning on the faucet fast, the water comes out with much more pressure, causing water to splash everywhere. Even when in a hurry, try not to turn on the faucet too fast.
Turning it on slowly reduces the force the water brings along with it. This prevents water from splashing in your kitchen sink.
7. Change the Faucet to one that Sticks Closer to the Middle of your Sink
Low faucets often do not stick close to the kitchen sink. This can cause water splashing behind the kitchen sink.
Faucets too high for the workstation kitchen sink can cause water to splash on the sink counter. A faucet of the right height sticks closer to the kitchen sink. This helps prevent water splashes in your kitchen sink.
8. Keeping the Activities in the Middle of the Sink
As simple as this may sound, it is absolutely true. Water splashes in the kitchen sink can be minimized by keeping the activities in the middle of the sink.
Do not wash at the edges. Rather, sticking the hands close to the middle of the sink prevents water from splashing on you and on the floor.
Why Kitchen Sink Splashes
1. High Water Flow Rate
The rate at which water flows out of the faucet contributes to water splashes. A high flow rate means the water comes out with force in tiny droplets. This brings with it much force and causes splashes.
As earlier seen above, aerators can be used to decrease the flow rate. Aerators mix air with the water, giving larger droplets with lower force and less splashing.
2. The Depth of the Sink and Height of the Faucet
The depth of the sink may be the reason water splashes in the kitchen sink. Relatively, a lot of activities are expected to be done in the kitchen sink. Because of this, a high faucet and a deep sink are ideal for the kitchen.
If the kitchen sink is not deep enough, water splashes out easily. The kitchen sink can be replaced with a deeper one in this instance.
A low faucet is not suitable for the kitchen as it does not stick to the middle of the sink. This can cause water to splash back into the sink. A low faucet should be replaced with a high one.
3. The Size of the Faucet End
The tiny faucet end may be the cause of water splashing in your kitchen sink. A tiny faucet end ejects the water with a lot of force. This causes water splashes all over your kitchen sink. This can be rectified by changing your faucet end to a wider one.
While it is not advisable to use a tiny faucet end for a kitchen sink, it is of advantage in the bath tub.
4. Position of the Faucet
This is applicable when you have a flexible faucet. The faucet should be positioned in a way that water will not splash. This can prevent the water from splashing all over you and on your kitchen floor.
Also, the faucet end should not be positioned too inwardly to avoid water splashing behind the sink.
How to Stop Water Splashing in Kitchen Sink
Step 1: Choosing the Right Faucet
Shallow sinks are a great reason for water splashing. You have the faucet tap and sink too close to each other. When pressurized water comes out and hits the surface, it creates splashing more easily. You need to choose either a deep sink or a short faucet to maximize the tap-surface distance. The bathroom and kitchen sink has different faucet types and flow rates. Choose kitchen sinks specifically.
Step 2: Adjust Water Pressure
The most common reason for having water splash is because you’re opening the tap too fast. This creates water pressure and a high flow rate suddenly, which causes water to splash. You should slowly open the tap to prevent this.
If it occurs too much, you can adjust the shut-off valve located under the faucet to set a lower default flow rate. Now even if you’re in a hurry, splashing won’t occur. But you’ll have a slower flow.
Step 3: Use an Aerator
Aerators are incredibly effective to reduce splashing. Turbulent flow is one of the main causes of water splashing. An aerator mixes air with the flowing water, creating tiny bubbles. It reduces water flow and turbulence.
In outdoor hoses, this isn’t ideal, but for kitchen sinks, they can be very helpful. Just buy and attach an aerator with the faucet and you have a nice uniform water flow with minimal splashing.
Step 4: Use a Splash Guard
Splash guards are useful covers that disperse falling water flow and prevent splashing. Water splashes when falling on the naked sink. Splash guards have tiny flaps to dissipate splashing. Find a good splash guard according to sink size and you’re good to go. You can also use sink grids which also do a similar job differently by dispersing splashed water.
Tips for Keeping a Kitchen Sink Counter Dry
On the off chance that the kitchen is the core of the home, the sink is the core of the kitchen. From washing dishes to tidying up, you invest a lot of energy close to your kitchen sink.
Periodically, the Kitchen sink counter gets jumbled with kitchen necessities, similar as wipes, dish cleanser, and hand towels.
Keeping a kitchen sink clean and dry can appear to be an overwhelming assignment. Here are a few tips on how to maintain a dry and sparkling kitchen sink counter.
- Make cleaning your kitchen sink counter a piece of your normal cleaning schedule
- Keep your Kitchen sink counter clean every day by adding a spurt of dishwashing fluid to a bowl of warm water. Plunge a perfect wipe, material or paper towel dipped in the mixture and scour the sink delicately to eliminate food and stains.
- Dry your counter with a paper towel after each utilization. Keeping your kitchen sink counter dry will assist reduce the microbial load, and keep them away. Microbes breed better in a warm, wet climate.
- Keep cleaning swipes close: Have wipes in the Kit. After cleaning the sink counter thoroughly, also dry it with the wipes. This clears away any moisture or dirt on the counter.
- Make sure to clean the faucet, faucet handle and drain stopper using a solution with antibacterial activity. Preferably, use a cleaning solution that is chemical-free.
Key Takeaway
The kitchen is an important part of the house and apart from cooking, a major activity in the kitchen is washing which is carried out in the kitchen sink.
The sink should be the center of attention in your kitchen, it is therefore important to keep the kitchen safe and dry.
You don’t want to see your body completely drenched by the splashes from the tap all during the washing process. Now that you know what causes water to splash incessantly from your kitchen sink and how to prevent it.
It is important to take note of every instruction in this guide, so you can prevent the kitchen’s water splashing hazards and complications.
